To Replace Coil Unit:
We Recommend Replacing the Coil Unit Over a Towel or Cloth
1) The Tank MUST be empty before replacing the coil unit. To empty tank remove mouthpiece, turn upside down & allow the liquid to drain.
2) Remove iClear from battery by turning knurled base counter clockwise. Always remove the iClear from battery by grasping & turning the knurled base ONLY. If you turn the tank it may separate from the base & liquid will leak out.
3) Hold iClear with base facing up & mouthpiece facing down. Turn knurled base counter clockwise to remove from tank.
4) Hold assembled base & coil unit with base facing down. Remove coil unit from base by turning knurled portion of coil unit counter clockwise.
5) Thread replacement coil unit on to base by turning clockwise, secure snugly but do not overtighten.
6) Replace the assembled base/coil unit to the tank and fill with liquid by removing mouthpiece. Allow the liquid to soak in for about 10-20 minutes on first fill & about 2-3 minutes on subsequent refills.
7) Connect the iClear to your battery & you're ready to go!
Important! - Always Disconnect/Connect the iClear to the Battery By Grasping & Turning the Knurled Base ONLY. If the Tank Is Turned Counter Clockwise It May Disconnect From the Base & Liquid Will Leak Out.